Wowhobbies смотреть последние обновления за сегодня на .
Walkera 4F200 available at 🤍wowhobbies.com Wow Hobbies is making 3 critical adjustments to all the 4F200 they are shipping. The adjustments were recommended by DKfuji, Tail blade tension, RX antenna and swashplate ball links- lock-tite. It is 100% stock except for the 3 adjustments. It was flown with the stock lipo on a Walkera 2801Pro TX.
Now shipping at 🤍 Captain's log: August 6, 2010. The V120D02 helis have just been delivered to our California warehouse. Being so anxious to see how it is going to perform, I immediately put it on its maiden flight, without any warm up or practice on the feel of this beast. To my surprise from the first flight I was able to take it around the room. In the beginning, I was a little rusty then I started to get a hang of it. I had no fear to of the tight quater as my confidence grew in the brief moment of the flight.
Available at 🤍wowhobbies.com This is the easiest to fly single rotor helicopter ever created. It is easier to fly than the Walkera CB100. It can be challenging for intermediate pilots if you set up an obstacle air course.
Walkera CB180Z - Test Flight with Extended Cyclic Servo Horns from Wowhobbies ( 🤍 ) With greatly improved forward/backward speed, a must have for all Walkera CB180Z owners!! And the 3-axis gyro is also turned off!
Devo 10 release date is 3/22 and will be available in premium gun metal black version at [url]🤍WowHobbies.com[/url] The resolution of the LCD screen of Devo 10 radio is high so it contains graphs like the WK2801-PRO. The screen is also viewable in broad day light because it is backlit. Basically it is like a WK2801-PRO, except it has the additional features which are not commonly found in the tradition 2.4ghz radios. Here we go, Telemetry which displays voltage, temperature, rpm and GPS info from aircraft 7 point curve Extra large text which is easy to read for the older generation Vibration alarm 10 channels including 2 channels with smooth servo control Upgradable firmware online 30 model memory There are 3 versions of this radio and all include the new RX1002 ten channel receiver in the package. Retail Price $135.95 for basic black plastic version (bare black plastic, no finish) $139.95 for silver finish version (looks exactly like the Walkera WK2801-Pro) $149.95 for the gun metal finish version (same anodized finish as the Devo 8s) We will be carrying the most expensive version, since this version has the expensive look and does not reflect the glare from the sun like the silver finish version.
SUPER HOT ROD WALKERA UFLY 3 cell ver. AVAILABLE AT 🤍 4 MAJOR UPGRADES: TURBO ACE 35410 BL MOTOR, 18A ESC DIGITAL TAIL SERVO, HH GYRO
Available at 🤍 The Turbo Ace X720 is designed for FPV and professional photographic and video applications aside from its recreational high performance capabilities. It has an extra large payload of 3.1 pound verses its predecessor T580 with only 1.6 pound payload. The X720 has the capability to carry a Canon, Nikon DSLR camera, most function packed hardisk camcorders or an extra large battery that increases its fight time to more than 30 minutes. Turbo Ace X720 will accept most FPV setup which is pretty straight forward to install. It will work with any 2.4gHz radio/receiver (All 2.4gHz radio and receiver are proprietary and you can not use a radio with a different brand of receiver). We recommend the Walkera WK2801-pro radio and RX-2801 receiver because you will have access to more helicopter models than any other radio including the DX7. The reason is Walkera makes more than 90 models of helicopters and that is more than any heli manufacturers in the world. FEATURES High payload: Carries up to 3.1 pounds of photo/video equipment FPV: Ultra stability and advanced functions suitable for first person view Pilot friendly: Auto leveling and altitude hold for ease of control Low noise: Great for commercial aerial video and photo applications PERFORMANCE Low noise- Direct drive low kv BL motors with 12 inch high pitch low revolution propellers Maximum efficiency segment up to 12g / W. 6 DOF motion control with high-performance MEMS sensor technology, impact resistance and low drift. Altitude hold with build-in barometric sensor Intuitive operation, with two-dimensional self-stabilization head support Specification: •Assembled & Tested Turbo Ace Muti-Rotor Quad •4 Upgraded Direct Drive Outrunner Motors powered by 4 x ESCs (10A) •Cutting Edge Controller with Auto Leveling & Altitude Hold with 3-Axis gyro •Expanded Dimensions for Extra Wind Tolerance •Counter Rotating Design for Maximum Stability •3.1 LB Payload For Additional Equipment and Optional Features •Optional Camera Mount with Dual Shock Absorption and Vibration Dampening system •Optional 2.4GHz Receiver and Transmitter (4 or more Channels Spread Spectrum) •Optional Lipo Battery Selections for Optimized Flight Time or Payload •Dimensions: 615 x 615 x 243mm (tolerance = 3mm) •Expanded Dimensions: 892 x 892 x 243mm •Motor Wheel Base: 580mm (tolerance = 3mm) •Propellers: 1260 High Pitch Positive and Negative Counter Rotating Propellers •Battery Requirement: Lipo 1,800mAh 20C 3S 1P or larger (Up to 10,000mAh for 30+ min flight time) •Assembled Weight: 770g (not including battery, receiver & camera mount) •All-in Weight: 990g (including battery & receiver) •Maximum Payload with 1P Battery: 1,406g (3.1 lb) Wow Hobbies is the exclusive master distributor for Turbo Ace. We are now accepting dealers. To qualify, you must have a RC website of significant product selections. Please use the "Contact Us" tab to submit your website information. The X720 ARF Package (without receiver, transmitter, battery, charger and camera mount) has a map price of $499.95 to better protect our dealers.
Enquire at 🤍WowHobbies.com through Contact Us. This is the hottest micro heli video of the V120D02 with the optional super power Turbo Ace 915 motor 🤍 It does everything a Trex450 can do in an all-out 3D showdown of the best flying micro ever created. It does tick tocks, rainbow and inverted climb out which easily out performs the Walkera 4G6, 4G6S and the E-flite Blade MCPX. Configuration: Motor: Turbo Ace 915 (running at 4750rpm head speed) Receiver: Special firmware Battery: 650mAh Linear Tail shaft: Titanium drive shaft Main shaft: Stay True main shaft All up weight with battery minus canopy: 88g Pilot: Manual Campos Camera man: Jose Campos Heli build and own by DKFUJI Enquire at 🤍WowHobbies.com through Contact Us. Special order only.
New 8000kv 2S 9g Motor from 🤍wowhobbies.com. Pilot - Buildem336 Upgrades: Metal swash plate, metal slider and tail box, Hyperion 500mah pack Mods: New B gear, epoxied C & D gears
Well this micro quad copter looked amazing in videos; however, my testing of it did not impress me one bit. The delay between input on the transmitter to the helicopter reacting is very long. It makes it almost impossible to hover or keep still, or even fly normally. Can't recommended this one, but, I will do more testing with it. This heli kit was purchased from Wow Hobbies. I hear this heli works great with a Devo transmitter; however, the link they provided in this RTF package does a very poor job. It should not be sold as it is being sold with the current transmitter setup.
SUPER HOT ROD WALKERA UFLY 2 cell ver. AVAILABLE at 🤍 4 MAJOR UPGRADES: TURBO ACE 36611 BL MOTOR, 18A ESC DIGITAL TAIL SERVO, HH GYRO
Walkera CB180Z-Pro at 🤍 Unlike the stock CB180Z the Wind-Rider is an action packed upgraded CB180Z called the CB180Z-Pro which can fly well in 3-5 mph wind at the same time being able to retain its easy-to-fly Bell characteristic of the stock CB180Z. The maneuverability comes from the extra travel in its cyclic servos which is lacking in the stock model. We will also include the stock servo parts in this package so you can easily go back to the CB180Z stock form even thou you would never need to. See video on what the Wind Rider can do that can't be done on the stock CB180Z. 🤍 There are several versions of the CB180Z. Buyers please beware of the differences. 1. Stock CB180Z & WK2402 transmitter. 2. Upgraded CB180Z-Pro Wind-Rider & WK2402 transmitter (Without dual rate). The upgraded CB180Z-Pro has extended servo travel and is more agile than the stock versions. 3. Stock CB180Z & WK2403 transmitter with the upgraded dual rate and throttle limit adjustments. This is a $15 upgrade from 2402 to 2403. 4. Upgraded CB180Z-Pro Wind-Rider & WK2403 transmitter with dual rate which allows for tame or wild outdoor windy conditions flights at a flip of a swith on the transmitter. It also has a throttle limit adjustments. The upgraded CB180Z-Pro impletements the extended servo travel and is much more agile than the stock versions.
Walkera 4G6 with new 3-Axis Gyro/Rx. Available at 🤍 Also tried going flybarless as well with the new gyro. Very stable and agile. Nice.
Available at 🤍 Walkera Devo 10 incorporates many of the functions that are not available in the traditional radios. You can set the vibration alarm to go off at the voltage you defined. This gives you added protection for your valuable RC equipment. Telemetry which displays voltage, temperature and GPS info from the aircraft 7 point high resolution throttle and pitch curve graphs Extra large text which is easier to see Vibration alarm 10 channels with 2 channels for smooth servo control Upgradable firmware online 30 model memory Long range transmission
Walkera V450D01 is available at 🤍 Show case demo at AMA Expo. Maiden flight out of the box with upgraded Turbo Ace 804 motor, Flybarless 3-Axis Gyro.
Available at 🤍 RTF with fully installed LED lighting system. LED color and lighting are designed to conform with FAA aircraft lighting rules. The CB180Z-Pro-LED enables night flying when the wind is mostly calm. Each side of the heli has 3 LED which flashes in sequential pattern and one anchor light that remains solid for better visual. 3 LED can be turned off and transformed to the scale look with only one solid lit LED on each side. FAA rules in avoiding aircraft collision, when you see aircraft with red light it immediately signifies its 9 o'clock heading and when you see green light, it's 3 o'clock heading. Other lights included are double head lamps and flashing tail light. Pilot side- Red lights (3 LED in sequential flashing pattern and can be turned off plus one anchor LED that remains lit, total of 4 LED on each side) Passenger side- Green lights (3 LED in sequential flashing pattern and can be turned off plus one anchor LED that remains lit, total of 4 LED on each side) Double front landing lights- 2 white LED head lamps Tail light- Flashing white LED Total of 11 LED installed on heli plus 3 extra spare LED bulbs one each in white, red and green. Package includes the Upgraded CB180Z-Pro-LED Wind-Rider & WK2403 transmitter with dual rate and throttle limiter adjustments. Unlike the stock CB180Z, the Wind-Rider is an action-packed upgraded heli that flies well in 3-5 mph wind while retaining its easy-to-fly Bell characteristics. The maneuverability comes from the extra travel in its cyclic servos, which the stock model lacks. We will also include the stock servo parts in this package so you can easily return to the CB180Z stock form, even though you would never want to.
Available at 🤍 Walkera has been busy trying to come up with a revamp of the RX2610S that works under 2801 mode. They have succeeded but only it comes with a bigger package that fits on the 4F200. This is very cool since this RTF heli including the programmable WK2801PRO is selling for less than a programmable 3-axis gyro from Align or SK. Competition and technologies in the RC helicopter field is advancing in an unprecedented pace. It won't be long before we will see an unman (hands off) heli that flies by itself to programmed GPS locations such as the Octo UFO but it comes with a huge price tag. For now, we can all enjoy the advanced technology of the 4F200 at a fraction of what similar helis use to cost less than a year ago. IMO the 4F200 is Walkera's best CP model in terms of stability and performance due to its 3-axis gyro and a fully programmable receiver from the matching WK2801PRO transmitter.
Available from 🤍 soon. We are honored to receive and review the first smallest 3-axis micro helicopter in the world. Preliminary test flight shows that Walkera's technology has been progressing in astronomical rate with this new super small flybarless heli. Walkera is releasing an average of one new model per week and I would hate to be in their competitors' shoes. Anyway this little jewel is very special and deserves some attention. The V100D01 takes after the CB100/4#3B construction and design, however the flight charasteristic is completely different and it is like owning a very different heli. It features flybarless cool looking design operated by a built-in 3-axis gryo. It is extremely fast.
Here is the first park flight of my mod'd Lama3. Took some real hard turns and no blade strike!!! Still need to do some fine tuning but it looks promising for this heli now. Flew out the pack by accident so I had to auto down into the grass from about 15ft up. Results - No damage at all. Sweet.
Walkera 4g3 Turbo Double Brushless Available at 🤍
Here is another video this time longer of my Walkera 4G6 with Wowhobbies.com Turbo upgrade motor its an awesome motor way more power than stock and longer flight time also. 🤍
Walkera Mini cp available at 🤍 There has been discussion in the forum about the stock Mini CP which Walkera is currently shipping, not performing like the one in this video. This is because during the mass production run, Walkera has changed the gearing of the Mini CP to compliment the lower output stock battery being shipped. Now, Wow Hobbies has upgraded this version back to its original PRO form by re-gearing and upgrading the battery. The modification produces the extra torque needed for all-out 3D as shown on the video. The PRO version package includes 2 batteries, one upgraded 240mAh, true 25C (measured, not what factory claims) with connector installed in the USA and one Walkera stock 240mAh at true 20C (measured, not what factory claims). Both batteries have been tested and compared and the upgraded battery generates head speed at approximately 200rpm more than stock Walkera 240mAh battery, using the same gears. The upgraded battery also has twice the cycles than the stock battery. Fly both batteries with the new gear Wow has installed for you and compare them, be your own judge of the difference in torque and head speed. All parts remain to be Walkera stock Mini CP and Genius gear, so they are easy to obtain. Wow Hobbies has geared this heli precisely to match with upgraded battery so you don't have to do any of the work.
Got the newest Devo 10 transmitter in gun metal black from 🤍wowhobbies.com to fly my Trex 500 Pro. Using the new 10 channel Rx that comes in the $149 package. It works perfectly so far. Definitley a lot of bang for the buck with this radio.
Walkera V500D01 3d flight at 🤍WowHobbies.com This is the lastest Wow Hobbies approved version with long range receiver. Wow Hobbies has been closely working with Walkera through several versions of this model in the past 6 months. The test was completed by world class pilot and modeler for all out 3D test. The receiver, main frame and hardware have been upgraded for extreme 3D maneuver. There are 2 versions of the V500D01, Devo transmitter compatible or WK2801-Pro compatible.
Rafa's first outdoor flight with his new Walkera 4F200 from Wowhobbies. I'm a pretty new pilot, which says a lot about the stability of this new heli out of the box.
Added the Gaui 200 light kit to my mod'd 180Z for some night flying. Pretty cool look so far. Love the way this heli flies too.
Here is the link to this Plug-n-play Brushless Kit 🤍 | Helicopter is equiped with 2 brushless outrunner motors, 2 brushless ESC and 2 converters. Uses exiting Eflite 3-in-1 mixer and AR6100E. Lighter, faster, more powerful and durable Plug-n-play brushless conversion kit for Eflite CX2, CX3 and Esky Lama 3 and Lama 4.
I just got this Walkera 60B and this is one of my test flights. So far really impressed for a RTF heli. 🤍 🤍
Here is the first vid of the 3 axis gyro doing a little 3D. It was really windy and Manny did his best with her.
Wowhobbies.com are a complete rip off with their propellers and how they trick their customers into having to only buy from them. They don't tell you up front that 4 carbon fiber props are 116.00 and they know you'll need them since they sell you the cheapest plastic props for their quadcopters. Do yourself and your wallet a BIG favor and don't buy from wowhobbies.com keep looking for your quad. In your search check out dji, since i ended upgrading to them.