One of the first systems I built years ago using a 64 gallon tote from Lowe’s. I stopped using them because they are too expensive to ship but people who buy the AeroBox 2 make their systems like this. Also this is a brief overview for people who want to see how to make a true high pressure #aeroponic system. Lately I’ve had people buy a pump but don’t use an accumulator tank, this is one of the most important parts of your system. It stores passive energy so every time the solenoid opens a consistent psi of liquid is released to the misters. If you don’t use a tank the pump will have to turn on every time the solenoid opens. Only the pressure in the lines is available and dips without the pressure behind it. So any sized accumulator tank can be used, the 4 gallon “3.5 gallons” tanks are the cheapest and widely used. When you get the tank there is a stem on the tank that is similar to a bicycle tire. This is where you will inflate your tank with air to the 78 psi mark. Liquid compresses the air and a consistent 100psi level is held for until the tank empties triggering the pump to turn on and repeat the cycle. #TrueHPA #aeroponicgrowers #aerogrowers #aeroponics #cannabis #growingcannabis #cannabisoil #growingmarijuana #medicalmarijuana #marijuana #howtogrowweed #2020business #industry #massachusetts #USA #smoke #weedeveryday #weed #smokingweed #maryjane #customgrow420 #420 #qualitycontrol #awardwinning #organiccannabis #howhigh #eastcoast #salem #cannabisresearch #TrueHPA #trueHPA #highpressureaeroponics #aeroponics #aerogrowers #aeroponicgrowers
Thanks for the video. I'm just getting into that topic. Is it possible to run two boxes simultaneously with only one strong enough pump and pressure tank?
Out of curiosity how are you mounting the pump inside the box enclosure? Was hoping to get a better view from pics on the website, but looks like that won't be up until later.
Thanks for the consultation on the setup. Everything worked out perfect in the end. The equipment and set up was spot on. Your advice on the grow was really helpful too. Keep up the good work.
How did you get the nozzles to stay in the lid?
As mentioned by Uknown User, your website is broken. I sent an email to you, from your YT About Profile, but that's the same domain still, so not sure if you are able to receive that email. Really would like to chat at the very least. Don't think I can order though, due to being from a different country. Hope you are still getting YT comments.
The aeroponicgrowers.com/ aeroponicgrowers.com is broken. How can I buy the parts, please?
Thx it's freaking cold outside and this system lets me hang onto some of my starts longer and maintaining their care no matter there size if the spring happens to get pushed back I won't feel rushed to move my starts outdoors because of their size or needing to be repotted. Advice for taking a start like this that eventually goes into soil?
Double love for the whole system contained in the lid. I'm in love ❤️❤️❤️❤️ sending this to my husband and telling him this is what I want for Valentine's
If you want to switch back and forth between pressure or sprinkler could you do so on the same setup or use the same lines or heads on either system?
Love the idea of using that deep lid like that 👍
It's got wheels awesome 😁
I would like to know what water pump you are using
Man, you are having the success you deserve. Nice to see all the upgrades ❤ in a couple of years max results 💪