Aeroponics 101 - The true build - for hobbyists

16049
96
249
28.10.2020
Ghanzo

Ghanzo

34073
292
18
30.12.2006
Описание видео:

The true way to utilize the benefits of aeroponics depends upon air compression and delivery. This build is made of these components. Air compressor with regulator Solenoid valve Arduino (micro controller) Relay (for connecting the solenoid to the arduino) Aeroscience nozzles 10 microns Steel mesh filter Grow light Nutrients Wifi plugs to program the light and my drainage system On a small scale this setup isn't too convenient because of the noise. I found a pretty quiet compressor, but I still hear it if I listen in even though its in the garage. It's not soo loud, but it goes off every 15 minutes or so and is a bit annoying. I've since moved into soil. The reason that I'm showing this setup is because the NASA scientists used a smaller droplet, and this is the way that they did it. On a larger scale the setup begins to make more sense, because you can get a nice compressor with a 1000 gallon tank and charge it once a day or something. Anyways, best of luck to you all.

Кадры из видео
Aeroponics 101 - The true build  - for hobbyists
Aeroponics 101 - The true build  - for hobbyists
Aeroponics 101 - The true build  - for hobbyists
Aeroponics 101 - The true build  - for hobbyists
Тэги из видео
Комментарии пользователей:
Rufus Cubano
2022-07-09 12:28:55

Hi, really nice set up, exactly what I'm planning right now,except I have designed a 3d printed tower. Any advantages of using the air compressor over a water pump like the 8800?

Martin Kirik
2022-06-10 17:52:23

The smartest video on the subject.

Figure it out and fix it!
2022-06-10 13:52:57

Nice work bro

Just John
2022-05-26 20:06:16

Hi Ghanzo,

I am trying to see if I have this right. Please correct if I am wrong. So you run a sleep timer on the Arduino that executes code to turn on a switch/relay that will open the solenoid allowing air to go through (compressor) whilst simultaneously sucking air from the line you have going to your nutrients. This is the main function of you setup correct?

So how did you know/get the mixture right in your nutrient tank (big glass jar) as well as the right ratio of air to nutrients mixture? Nutrients in PPM but nozzles in microns.

michael Conway
2022-05-01 00:11:20

Hell of an expensive way to grow a few strawberry plants- don't you think?

Marcos Huerta Plaza
2022-04-30 08:29:03

Hi, how much water pressure did you set? You onky talk about air pressure, thanks!!

Sawyer
2022-04-23 11:17:02

Have you ever tried using a pond fogger,? ( basically its a scaled -up , ultrasonic humidifier

NixInneundos
2022-02-21 08:30:10

Tbh the plants are more the carbon from the air than they are the nutrients

jeffrey weinstein
2022-02-19 16:34:22

What type of solenoid valve did you use? It looks to be the type for liquid based systems, like an RO, but used on the pneumatic line. Is that correct? Also, how many gallons is your compressor? Thanks for this very helpful video! I've been looking for a true dry fog/ air atomizing aeroponics system build for a while now.

Burn1 Down
2022-01-18 02:17:36

this is great dude

Sam Dennis
2022-01-13 23:38:11

Great looking setup! How has this system been working? I have designed and 3d printed an AAA nozzle, and I get good mist (bordering on fog), but I am finding that the root chamber although wet and root development seems to be good, plant growth is slow. I also find that a single nozzle isn't giving coverage to the plants closest to the nozzle, but out of the stream aren't doing as well. Would love to have a further conversation with you about this.

evolve
2021-12-21 19:37:20

looks awesome! what material are the boxes made out of you are using?

Shackle Sexy
2021-12-17 11:07:35

🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🍓

Paulinus Phillips
2021-12-13 11:12:14

I'm interested in setting and aeroponic cloning system like yours viewed from YouTube I would like to know if you could build one like yours for me that I can purchast

Stephen Jackson
2021-12-06 03:52:13

Best video I've seen on an aeroponic setup by far. Using the aeroscience atomizers actually simplifies the system a lot and is more true to the NASA build with the size of the droplets you're delivering. Nice work!

Others have pointed out that the low pressure or "mister" setups work, but I'd be curious to see the difference in results. The other methods are essentially doing a hybrid hydroponics which isn't aeroponics. Like you said there is a scalability "issue"; however, I think that could be easily overcome. When I saw you using the atomizers my first thought for cost savings was 3D printed atomizers. Also my guess is the pressure demands don't hinder large scale aeroponics companies from using HPA.

Keep it up!

Scarpa Colombo
2021-09-18 22:44:12

Hello I have not had chance to read your comments replies etc. But quick answer to your questions you stated in your excellent video by the way..is that beneficial microbes are ALWAYS NEEDED AND DESIRED IN SOIL AND IN ALL HYDROPONICS OF ALL PLANTS! IN FACT, STERILIZATION OF YOUR GROW DEVICES IN HYDROPONICS IS NECESSARY OF COURSE TO BE VERY CLEAN AND TIDY BUT NOT TOO CLEAN ALSO AS A MATTER OF FACT. FOR EXAMPLE WHEN USING A FILTER ON WATER PUMP(S) IN AEROPONICS FOR EXAMPLE I AND MANY OTHER EXPERIENCED HYDRO GROWERS ACTUALLY DO NOT USE BLEACH OR OTHER HARSH THINGS TO FULLY STERILIZE FILTER ELEMENTS BECAUSE IT WILL KILL ALL 100% OF THE BENEFICIAL BACTERIA YOUVE APPLIED AND ALSO BENEFICIAL BACTERIA IS NATURALLY LIVING WITHOUT HUMAN - SYNTHETIC APPLICATION AT LEAST IT'S ALWAYS EXISTING IN MINUTE AMOUNTS UNLESS STERILIZED FULLY WHICH IS WHAT IM TRYING MY BEST TO EXPLAIN, EASILY HOPEFULLY IN MY COMMENTS..MANY BRANDS/TYPES OF DIFFERENT BENEFICIAL MICROBES COME IN MORE OR LESS "POTENT" AND MORE OR LESSER OF "PURE QUALITIES" WHAT YOU GET IS WHAT YOU PAY FOR- "GENERAL HYDROPONICS" BRAND IS MY PERSONALLY USED AND FAVORITE FOR OVER 12 YEARS GOING ON STRONG. ANOTHER BRAND, "VIVOSUN" IS OTHER USED AND A PERSONAL FAVORITE IN PRODUCTS I'VE USED RELATED TO YOUR VIDEOS RELATED CATEGORY.{I DO NOT WORK FOR, NOR DO I/WILL I HAVE ANY REIMBURSEMENT IN ANY FORM WHATSOEVER, OTHER THAN MY SATISFACTION/ PERFECTION IN ALL OF MY GROWS IS DUE TO USING PRIMARILY THOSE BRANDS IN PRIMARILY HYDROPONICS, BUT ALSO IN SOIL. EVEN WITH MY AWESOME GREEN THUMB SO FAR AFTER 14+ YEARS WITH MY BOTANY SKILLS AQUIRING MY BACHELORS DEG IN BOTANY WAS EASIER ALSI WITH THOSR BRANDS AND OTHERS ALSO.

desmondlee3434
2021-07-22 17:18:55

Amazing. May I ask how do u drain the water accumulated inside the tub?

Average Joe and a 64 1/2 Mustang
2021-07-06 03:16:29

Oh yeah, simple set up. Anyone can do it. Just got that stuff laying around. 🤪

t......

travis gillespie
2021-05-15 10:47:38

Very helpful, thanks for sharing 👍

Что ищут прямо сейчас
Aida Samb juragan empang angklung malioboro мимимишки новые серии как создаются читы Ahmed Saad 三国演义 Ahmed Mohamed للحمام Ahmed Mohamed دكتور حمام петь kino yoga jemele hill Canlı yayın jagan mohan reddy hunar sidhu уз кино Ah Nerede Aguska nupur sharma Agulu kissi missi
Похожие видео
18.08.2017
Building an Inexpensive Hydroponics/Aeroponics System

Building an Inexpensive Hydroponics/Aeroponics System

02.11.2020
How I make a basic - True High Pressure Aeroponic

How I make a basic - True High Pressure Aeroponic "Small" DIY Root Chamber

11.08.2017
Aeroponics Intro

Aeroponics Intro

27.06.2017
Vortex Aeroponics - Poseidon Hydroponic Systems

Vortex Aeroponics - Poseidon Hydroponic Systems

13.03.2020
Easy to Build DIY Misting System!

Easy to Build DIY Misting System!

01.07.2020
BUILDING A MONSTER FOGPONIC MACHINE /  Aeroponics scoot over!

BUILDING A MONSTER FOGPONIC MACHINE / Aeroponics scoot over!

23.04.2019
How to Build a Simple Aeroponics System

How to Build a Simple Aeroponics System

14.11.2013
5 Gallon Bucket Aeroponics - The easiest aeroponics system to build - Full Class HD

5 Gallon Bucket Aeroponics - The easiest aeroponics system to build - Full Class HD

08.12.2014
Teens create automated aeroponics garden kit with NASA tech

Teens create automated aeroponics garden kit with NASA tech

12.06.2020
How I Build a High Pressure Aeroponic Root Chamber From an Igloo Cooler | In-Depth Long Video

How I Build a High Pressure Aeroponic Root Chamber From an Igloo Cooler | In-Depth Long Video

03.05.2016
How to make an inexpensive low-pressure aeroponics system

How to make an inexpensive low-pressure aeroponics system

26.08.2020
Nutrient Film Technique: You’re Doing it Wrong!

Nutrient Film Technique: You’re Doing it Wrong!

14.04.2018
Cheap & Easy DIY Hydroponics | Ditch the expensive stuff for a $1 Pool Noodle

Cheap & Easy DIY Hydroponics | Ditch the expensive stuff for a $1 Pool Noodle

21.03.2021
How to Grow Kratky Hydroponic Lettuce Cheap & Easy

How to Grow Kratky Hydroponic Lettuce Cheap & Easy

30.05.2020
Build an Automated Hydroponic System

Build an Automated Hydroponic System

27.02.2019
High Pressure Aeroponics System Components Explained

High Pressure Aeroponics System Components Explained

24.02.2017
Cheap Ultrasonic Aeroponic / Hydroponic How-To

Cheap Ultrasonic Aeroponic / Hydroponic How-To